View ATM0800D9_9000821.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

az displays specifications for liquid crystal display customer approval part no. : ATM0800D9(az di splays) ver1.0 approval company chop customer comments az displays engineering approval designed by checked by approved by herbert
ATM0800D9(az displays) tft module v1.0 2 az displyas document revision history change no. date subject and reason version no. responser 1 2015.05.08 first issue 1.0
ATM0800D9(az displays) tft module v1.0 3 az displyas contents --. co ver .................................................................................................................... ................ 1 --. document re vision history ................................................................................................ .. 2 --. cont ents ................................................................................................................. .............. 3 1. generalspec ifications ...................................................................................................... ..... 4 2. pinass ignment .............................................................................................................. ........ 5 3. operationspec ifications .................................................................................................... .... 8 3.1. absolutema ximumrating ........................................................................................... 8 3.1.1. typicalopera tionconditions ................................................................................. 9 3.1.2. currentconsumption .......................................................................................... 10 3.1.3. backli ghtdriving cond itions ............................................................................... 10 3.2. powersequence ....................................................................................................... 11 3.3. timing charac teristics .............................................................................................. 12 3.3.1. acelectrical characteristics............................................................................... 12 3.3.2. datainputformat ................................................................................................ 13 3.3.3. timing ................................................................................................................. . 14 4. optical specifications ..................................................................................................... ..... 15 5. reliabilit ytestitems ....................................................................................................... .... 19 6. generalpr ecautions ......................................................................................................... . 20 6.1. sa fety ................................................................................................................... .. 20 6.2. handling ................................................................................................................. .. 20 6.3. static electricity ....................................................................................................... . 20 6.4. storage .................................................................................................................. ... 20 6.5. cleaning ................................................................................................................. .... 20 7. menchanica l drawing ....................................................................................................... 21 8. packing form .................................................................................................................... 22
ATM0800D9(az displays) tft module v1.0 4 az displyas 1. general specifications no. item specification remark 1 lcdsize 8.0 inch(diagonal) 2 driverelement a-si tft active matrix 3 resolution 800 3(rgb) 600 4 displaymode normally white, transmissive 5 dotpitch 0.0675(w) 0.2025(h) mm 6 activearea 162.0(w) 121.5(h) mm 7 modulesize 183.0(w) 141.0(h) 6.4(d) mm note 1 8 surface treatment anti-glare 9 color arrangement rgb-stripe 10 interface digital 11 backlight power consumption 1.84w (typ.) 12 panel power consumption 0.356w(typ.) 13 weight tbd note 1: refer to mechanical drawing.
ATM0800D9(az displays) tft module v1.0 5 az displyas 2. pin assignment 2.1. tft lcd panel driving section 1. fpc connector is used for the module electronics interface. the recommended model is fh12a-50s-0.5sh manufactured by hirose. pinno. symbol i/o function remark 1 nc no connection 2 nc no connection 3 nc no connection 4 nc no connection 5 gnd p power ground 6 v com i common voltage 7 v cc p power for digital circuit 8 mode i de/sync mode select note3 9 de i data input enable 10 vs i vertical sync input 11 hs i horizontal sync input 12 b7 i blue data(msb) 13 b6 i blue data 14 b5 i blue data 15 b4 i blue data 16 b3 i blue data 17 b2 i blue data 18 b1 i blue data 19 b0 i blue data(lsb) 20 g7 i green data (msb) 21 g6 i green data 22 g5 i green data 23 g4 i green data 24 g3 i green data 25 g2 i green data 26 g1 i green data 27 g0 i green data (lsb) 28 r7 i red data (msb) 29 r6 i red data 30 r5 i red data 31 r4 i red data
ATM0800D9(az displays) tft module v1.0 6 az displyas 32 r3 i red data 33 r2 i red data 34 r1 i red data 35 r0 i red data (lsb) 36 gnd p power ground 37 dclk i sample clock 38 gnd p power ground 39 l/r i right/ left selection note2,5 40 u/d i up/down selection note2,5 41 v gh p gate on voltage 42 v gl p gate off voltage 43 av dd p power for analog circuit 44 reset i global reset pin. note1 45 nc no connection 46 v com i common voltage 47 dithb i dithering function note 4 48 gnd p power ground 49 nc no connection 50 nc no connection i: input, o: output, p: power note 1: global reset pin. active low to enter reset state. suggest to connecting with an rc reset circuit for stability. normally pull high. note 2: selection of scanning mode setting of scan control input scanning direction u/d r/l gnd v cc up to down, left to right v cc gnd down to up, right to left gnd gnd up to down, right to left v cc v cc down to up, left to right note 3: de/sync mode select, normally pull high. h: de mode. l: hs/vs mode. note4: dithering function enable control.normally pull high. dithb= 1 ,disable internal dithering function. for 18bit rgb interface, connect two lsb bits of all the r/g/b data buses to gnd. dithb= 0 ,enable internal dithering functi on, for ttl 24bit parallel rgb image data input.
ATM0800D9(az displays) tft module v1.0 7 az displyas note 5: definition of scanning direction. refer to the figure as below: 2.2. led backlight pin no symbol function 1 a anode 2 k cathode note: input connector:bhsr-02vs-1(jst) outlet connector:sm02b-bhss-1(jst)
ATM0800D9(az displays) tft module v1.0 8 az displyas 3. operation specifications 3.1. absolute maximum rating (gnd=av ss =0v, note 1) item symbol values unit remark min. max. power voltage v cc -0.3 5.0 v av dd -0.5 13.5 v v gh 13.0 19.0 v v gl -12.0 -2.0 v v gh -v gl - 31.0 v operation temperature storage temperature t op -20 70 t st -30 80 led reverse voltage v r - 1.2 v each led note 2 led forward current i f - 25 ma each led note 1: the absolute maximum rating values of this product are not a llowed to be exceeded at any times. should a module be used wit h any of the absolute maximum ratings exceeded, the characteristics of the module may not be re covered, or in an extreme case, the module may be permanently destroyed. note 2: vr conditions: zener diode 20ma
ATM0800D9(az displays) tft module v1.0 9 az displyas 3.1.1. typical operation conditions (gnd=av ss =0v, note 1) item symbol values unit remark min. typ. max. power voltage v cc 3.0 3.3 3.6 v note 2 av dd 10.2 10.4 10.6 v v gh 15.3 16.0 16.7 v v gl -7.7 -7.0 -6.3 v input signal voltage v com 2.8 3.8 4.8 v note 4 input logic high voltage v ih 0.7v cc - v cc v note 3 input logic low voltage v il 0 - 0.3v cc v note 1: be sure to apply v cc and v gl to the lcd first, and then apply v gh . note 2: v cc setting should match the signals output volt age (refer to note 3) of customer?s system board . note 3: dclk,hs,vs,rstb ,updn,stlr,mode,dithb. note 4: typical v com is only a reference value, it mu st be optimized according to each lcm. be sure to use vr;
ATM0800D9(az displays) tft module v1.0 10 az displyas 3.1.2. current consumption (gnd=av ss =0v) item symbol values unit remark min. typ. max. current for driver i gh - 0.2 0.5 ma v gh =16.0v i gl - 0.2 1.0 ma v gl = -7.0v i cc - 5.5 10.0 ma v cc =3.3v iav dd - 32.0 50 ma av dd =10.4v 3.1.3. backlight driving conditions item symbol values unit remark min. typ. max. voltage for led backlight v l 8.8 9.2 9.6 v note 1 current for led backlight i l 180 200 220 ma led life time - 20,000 - - hr note 2 note 1: the led supply voltage is defined by the number of led at ta=25 and i l =200ma. note 2: the led life time is defined as the module bright ness decrease to 50% original brightness at ta=25 and i l =200ma. the led lifetim e could be decreased if operating i l is lager than 200 ma.
ATM0800D9(az displays) tft module v1.0 11 az displyas 3.2. power sequence 3.2.1. power on: vcc vgl vgh data b/l 3.2.2. power off: b/l data vgh vgl vcc note: data include r0~r5, b0~b5, go~g5, stlr,updn, dclk, hs,vs,de.
ATM0800D9(az displays) tft module v1.0 12 az displyas 3.3. timing characteristics 3.3.1. ac electrical characteristics item symbol values unit remark min. typ. max. hs setup time t hst 8 - - ns hs hold time t hhd 8 - - ns vs setup time t vst 8 - - ns vs hold time t vhd 8 - - ns data setup time t dsu 8 - - ns data hole time t dhd 8 - - ns de setup time t esu 8 - - ns de hole time t ehd 8 - - ns vdd power on slew rate t por - - 20 ms rstb pulse width t rst 10 - - us clkin cycle time t coh 20 - - ns clkin pulse duty t cwh 40 50 60 % output stable time t sst - - 6 us
ATM0800D9(az displays) tft module v1.0 13 az displyas 3.3.2. timing item symbol values unit remark min. typ. max. horizontal display area thd - 800 - dclk dclk frequency fclk - 40 50 mhz one horizontal line th 862 1056 1200 dclk hs pulse width thpw 1 - 40 dclk hs back porch(blanking) thb 46 46 46 dclk hs front porch thfp 16 210 354 dclk item symbol values unit remark min. typ. max. vertical display area tvd - 600 - th vs period time tv 624 635 700 th vs pulse width tvpw 1 - 20 th vs back porch(blanking) tvb 23 23 23 th vs front porch tvfp 1 12 77 th
ATM0800D9(az displays) tft module v1.0 14 az displyas 3.3.3. timing diagram figure 3.1 input clock a nd data timing diagram figure 3.2 horizontal input timing diagram.
ATM0800D9(az displays) tft module v1.0 15 az displyas 4. optical specifications item symbol condition values unit remark min. typ. max. viewing angle (cr 10) l =180(9 o?clock) 60 70 - degree note 1 r =0(3 o?clock) 60 70 - t =90(12 o?clock) 60 70 - b =270(6 o?clock) 40 50 - response time t on normal = =0 - 10 20 msec note 3 t off - 15 30 msec note 3 contrast ratio cr 400 500 - - note 4 color chromaticity w x 0.26 0.31 0.36 - note 2 note 5 note 6 w y 0.28 0.33 0.38 - luminance l 300 350 - cd/ O note 6 luminance uniformity y u 70 75 - % note 7 test conditions: 1. v cc =3.3v, i l =200ma (backlight current), the ambient temperature is 25 . 2. the test systems refer to note 2.
ATM0800D9(az displays) tft module v1.0 16 az displyas note 1: definition of viewing angle range fig. 4-1 definition of viewing angle note 2: definition of opt ical measurement system. the optical characteristics should be m easured in dark room. after 30 minutes operation, the optical properties are measured at the center point of the lcd screen. (response time is measured by photo det ector topcon bm-7, other items are measured by bm-5a/field of view: 1 /height: 500mm.) fig. 4-2 optical measurement system setup
ATM0800D9(az displays) tft module v1.0 17 az displyas note 3: definition of response time the response time is defined as the lcd optical switching time interval between ?white? state and ?black? state. rise time (t on ) is the time between photo detector output intensity changed from 90% to 10%. and fall time (t off ) is the time between photo detector output intensity changed from 10% to 90%. fig. 4-3 definition of response time note 4: definition of contrast ratio contrast ratio (cr) = luminance measured when lc d on the "white" state luminance measured when lc d on the "black" state note 5: definition of co lor chromaticity (cie1931) color coordinates measured at center point of lcd. note 6: definition of luminance: measured at the center ar ea of the panel when lcd panel is driven at ?white? state. the led driving condition is i l =200ma .
ATM0800D9(az displays) tft module v1.0 18 az displyas note 7: definition of luminance uniformity active area is divided into 9 measuri ng areas (refer to fig. 4-4 ).every measuring point is placed at the center of each measuring area. luminance uniformity (yu) = b min b max l-------active area length w----- active area width fig. 4-4 definition of measuring points b max : the measured maximum luminance of all measurement position. b min : the measured minimum luminance of all measurement position.
ATM0800D9(az displays) tft module v1.0 19 az displyas 5. reliability test items (note3) item test conditions remark high temperature storage ta = 80 240hrs note 1 note 4 low temperature storage ta = -30 240hrs note 1 note 4 high temperature operation ts = 70 240hrs note 2 note 4 low temperature operation ta = -20 240hrs note 1 note 4 operate at hi gh temperature and humidity +40 , 90%rh 240hrs note 4 thermal shock -30 /30 min ~ +80 /30 min for a total 100 cycles, start with cold temperature and end with high temperature. note 4 vibration test frequency range:10~55hz stroke:1.5mm sweep:10hz~55hz~10hz 2 hours for each direct ion of x. y. z. (6 hours for total) mechanical shock 100g 6ms,x, y, z 3 times for each direction package vibration test random vibration : 0.015g*g/hz from 5-200hz, -6db/octave from 200-500hz 2 hours for each direct ion of x. y. z. (6 hours for total) package drop test height:60 cm 1 corner, 3 edges, 6 surfaces electro static discharge 2kv, human body mode, 100pf/1500 ? note 1: ta is the ambient temperature of samples. note 2: ts is the temperature of panel?s surface. note 3: in the standard condition, there shall be no practical problem that may affect the display function. after the reliability test, the product only guarantees operation, but don?t guarantee all of the cosmetic specification. note 4: before cosmetic and function test, the product must have enough recovery time, at least 2 hours at room temperature.
ATM0800D9(az displays) tft module v1.0 20 az displyas 6. general precautions 6.1. safety liquid crystal is poisonous. do not put it in your mouth. if liquid crystal touches your skin or clothes, wash it off immediately by using soap and water. 6.2. handling 1. the lcd panel is plate glass. do not s ubject the panel to mechanical shock or to excessive force on its surface. 2. the polarizer attached to the display is easily damaged. pleas e handle it carefully to avoid scratch or other damages. 3. to avoid contamination on the display surface, do not touch the module surface with bare hands. 4. keep a space so that the lcd panels do not touch other components. 5. put cover board such as acrylic board on t he surface of lcd panel to protect panel from damages. 6. transparent electrodes may be disconne cted if you use the lcd panel under environmental conditions where the condensation of dew occurs. 7. do not leave module in direct sunl ight to avoid malfunction of the ics. 6.3. static electricity 1. be sure to ground module before tu rning on power or operating module. 2. do not apply voltage which exc eeds the absolute maximum rating value. 6.4. storage 1. store the module in a dark ro om where must keep at 2510 and 65%rh or less. 2. do not store the module in surroundings containing organic solvent or corrosive gas. 3. store the module in an anti- electrostatic container or bag. 6.5. cleaning 1. do not wipe the polarizer with dry cloth. it might cause scratch. 2. only use a soft sloth with ipa to wipe the polarizer, other chemicals might permanent damage to the polarizer.
ATM0800D9(az displays) tft module v1.0 21 az displyas 7. mechanical drawing display center 164.80 0.30(bezel opening) 162.00(active area) 91.50 0.50 70.50 0.50 183.00 0.30(module outline) 121.50(active area) 124.30 0.30(bezel opening) 141.00 0.30(module outline) 6.40 0.30 detail a 9.10 10.50 resolution:800(xrbg) 0.30 0.05 (60.00) 5.00 0.30 (stiffener) detail a scale 4:1 25.50 0.10 p0.5*(50-1)=24.5 0.05 w=0.50 0.10 3.80 0.30 d=0.15 (90) (71) 9.75 8.35 a b c d d c b a 1234 56 78 1234 56 78 u d o 7 r o h u d q f h 7. "*" for important dimension;( ) for reference dimention 6. mark mold cavity indentification in recess approximately where indicated. g u d i w d q j o h e 3.all radii without dimension r0.2 2.do not scale drawing. 1.unit:mm notes: 8. rohs must be complied.(use lead-free process) rohs 1 50 91.33 0.50
ATM0800D9(az displays) tft module v1.0 22 az displyas 8. packing form 8? 16

▲Up To Search▲

Price & Availability of ATM0800D9

	To Download ATM0800D9 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .